Áîòèê Ïåòðà I "Ñâ. Íèêîëàé" Àâòîðñêèé ïðîåêò ñòðîèòåëüñòâà ïîëíîìàñøòàáíîé Ðåïëèêè èñòîðè÷åñêîãî ñóäíà |
Blackfly
Àðõèâ ÷åðòåæåé äîñòóïåí ïî ññûëêå: | blackflyDWG.zip 1.1Mb |
Recommended Construction method: Lapstrake plywood, as described in Iain Oughtred’s book, Clinker Plywood Boatbuilding, and Tom Hill’s Ultralight Boatbuilding. Moulds do not need to be bevelled. Forward moulds should be located aft of the station marks on the strongback; aft moulds should be located forward of station marks. Materials: Keel, Inner----------------------------------- 5/8" cherry, ash, or similar Keel, Outer---------------------------------- ?" cherry, ash... Stem, Inner & Outer------------------------ 1 ?” laminated cherry, ash, doug fir, spruce or other Transom-------------------------------------- 3/4" mahogany, butternut, spanish cedar, or similar (transom may also be built up from 3/16" ply and solid frame) Planking-------------------------------------- 3/16" marine-grade okoume plywood, or similar. Bottom planks (garboard, broadstrake and third plank) may be gotten out of 1/4" ply for added strength. If weight is not a concern, 1/4" may be used throughout. Rubrails--------------------------------------- 3/4" Cherry, ash... Gunwale-------------------------------------- 5/8" X 3/4" Cherry, or similar Sheer clamp (inwale)------------------------ ?” X 5/8" spruce Sheer clamp spacer blocks------------------ 3/8" spruce Floor frames --------------------------------- 1" White cedar Breasthook----------------------------------- 7/8" cherry, ash... Quarter knees-------------------------------- 5/8" Cherry, ash... Mast thwart---------------------------------- 7/8" Cherry, ash... Middle thwart and support----------------- 3/4" Butternut, mahogany, or other lightweight wood. Thwart may be narrowed to save weight, but not reduced in thickness. Canoe-style thwart, forward---------------- 7/8" X 2" cherry, ash... Removable thwart (aft)--------------------- 3/4" Butternut, mahogany or similar Risers------------------------------------------ 3/4" cherry, ash... Daggerboard trunk--------------------------- 3/16" ply panels, with cedar spacers and cherry (or other) braces & cap. Rudder----------------------------------------- 5/8" mahogany, or similar Daggerboard---------------------------------- 3/4" mahogany, or similar Tiller------------------------------------------- 5/8" laminated ash, cherry.....
Offsets Offsets in feet- inches-eighths to the inside of the planking Heights above baseline Buttocks spaced at 6" intervals from CL
Halfbreadths from CL Waterlines spaced at 2 inch intervals, starting 4" above baseline at WL4
Diagonals Diag. A – 1' 2" up on CL, 1' 6" out on baseline Diag. B – 1' 4" up on CL, 2' out on baseline Diag. C – 1' 6" up on CL, 2' 6" out on baseline Diag. D – 1' 8" up on CL, 3' out on baseline
|
Èñïîëüçîâàíèå ìàòåðèàëîâ òîëüêî ñ ðàçðåøåíèÿ àâòîðà ñàéòà
|